c-libp2p/include/mbedtls/net_sockets.h
2016-11-03 11:15:18 -05:00

225 lines
8.3 KiB
C

/**
* \file net_sockets.h
*
* \brief Network communication functions
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_NET_SOCKETS_H
#define MBEDTLS_NET_SOCKETS_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include "ssl.h"
#include <stddef.h>
#include <stdint.h>
#define MBEDTLS_ERR_NET_SOCKET_FAILED -0x0042 /**< Failed to open a socket. */
#define MBEDTLS_ERR_NET_CONNECT_FAILED -0x0044 /**< The connection to the given server / port failed. */
#define MBEDTLS_ERR_NET_BIND_FAILED -0x0046 /**< Binding of the socket failed. */
#define MBEDTLS_ERR_NET_LISTEN_FAILED -0x0048 /**< Could not listen on the socket. */
#define MBEDTLS_ERR_NET_ACCEPT_FAILED -0x004A /**< Could not accept the incoming connection. */
#define MBEDTLS_ERR_NET_RECV_FAILED -0x004C /**< Reading information from the socket failed. */
#define MBEDTLS_ERR_NET_SEND_FAILED -0x004E /**< Sending information through the socket failed. */
#define MBEDTLS_ERR_NET_CONN_RESET -0x0050 /**< Connection was reset by peer. */
#define MBEDTLS_ERR_NET_UNKNOWN_HOST -0x0052 /**< Failed to get an IP address for the given hostname. */
#define MBEDTLS_ERR_NET_BUFFER_TOO_SMALL -0x0043 /**< Buffer is too small to hold the data. */
#define MBEDTLS_ERR_NET_INVALID_CONTEXT -0x0045 /**< The context is invalid, eg because it was free()ed. */
#define MBEDTLS_NET_LISTEN_BACKLOG 10 /**< The backlog that listen() should use. */
#define MBEDTLS_NET_PROTO_TCP 0 /**< The TCP transport protocol */
#define MBEDTLS_NET_PROTO_UDP 1 /**< The UDP transport protocol */
#ifdef __cplusplus
extern "C" {
#endif
/**
* Wrapper type for sockets.
*
* Currently backed by just a file descriptor, but might be more in the future
* (eg two file descriptors for combined IPv4 + IPv6 support, or additional
* structures for hand-made UDP demultiplexing).
*/
typedef struct
{
int fd; /**< The underlying file descriptor */
}
mbedtls_net_context;
/**
* \brief Initialize a context
* Just makes the context ready to be used or freed safely.
*
* \param ctx Context to initialize
*/
void mbedtls_net_init( mbedtls_net_context *ctx );
/**
* \brief Initiate a connection with host:port in the given protocol
*
* \param ctx Socket to use
* \param host Host to connect to
* \param port Port to connect to
* \param proto Protocol: MBEDTLS_NET_PROTO_TCP or MBEDTLS_NET_PROTO_UDP
*
* \return 0 if successful, or one of:
* MBEDTLS_ERR_NET_SOCKET_FAILED,
* MBEDTLS_ERR_NET_UNKNOWN_HOST,
* MBEDTLS_ERR_NET_CONNECT_FAILED
*
* \note Sets the socket in connected mode even with UDP.
*/
int mbedtls_net_connect( mbedtls_net_context *ctx, const char *host, const char *port, int proto );
/**
* \brief Create a receiving socket on bind_ip:port in the chosen
* protocol. If bind_ip == NULL, all interfaces are bound.
*
* \param ctx Socket to use
* \param bind_ip IP to bind to, can be NULL
* \param port Port number to use
* \param proto Protocol: MBEDTLS_NET_PROTO_TCP or MBEDTLS_NET_PROTO_UDP
*
* \return 0 if successful, or one of:
* MBEDTLS_ERR_NET_SOCKET_FAILED,
* MBEDTLS_ERR_NET_BIND_FAILED,
* MBEDTLS_ERR_NET_LISTEN_FAILED
*
* \note Regardless of the protocol, opens the sockets and binds it.
* In addition, make the socket listening if protocol is TCP.
*/
int mbedtls_net_bind( mbedtls_net_context *ctx, const char *bind_ip, const char *port, int proto );
/**
* \brief Accept a connection from a remote client
*
* \param bind_ctx Relevant socket
* \param client_ctx Will contain the connected client socket
* \param client_ip Will contain the client IP address
* \param buf_size Size of the client_ip buffer
* \param ip_len Will receive the size of the client IP written
*
* \return 0 if successful, or
* MBEDTLS_ERR_NET_ACCEPT_FAILED, or
* MBEDTLS_ERR_NET_BUFFER_TOO_SMALL if buf_size is too small,
* MBEDTLS_ERR_SSL_WANT_READ if bind_fd was set to
* non-blocking and accept() would block.
*/
int mbedtls_net_accept( mbedtls_net_context *bind_ctx,
mbedtls_net_context *client_ctx,
void *client_ip, size_t buf_size, size_t *ip_len );
/**
* \brief Set the socket blocking
*
* \param ctx Socket to set
*
* \return 0 if successful, or a non-zero error code
*/
int mbedtls_net_set_block( mbedtls_net_context *ctx );
/**
* \brief Set the socket non-blocking
*
* \param ctx Socket to set
*
* \return 0 if successful, or a non-zero error code
*/
int mbedtls_net_set_nonblock( mbedtls_net_context *ctx );
/**
* \brief Portable usleep helper
*
* \param usec Amount of microseconds to sleep
*
* \note Real amount of time slept will not be less than
* select()'s timeout granularity (typically, 10ms).
*/
void mbedtls_net_usleep( unsigned long usec );
/**
* \brief Read at most 'len' characters. If no error occurs,
* the actual amount read is returned.
*
* \param ctx Socket
* \param buf The buffer to write to
* \param len Maximum length of the buffer
*
* \return the number of bytes received,
* or a non-zero error code; with a non-blocking socket,
* MBEDTLS_ERR_SSL_WANT_READ indicates read() would block.
*/
int mbedtls_net_recv( void *ctx, unsigned char *buf, size_t len );
/**
* \brief Write at most 'len' characters. If no error occurs,
* the actual amount read is returned.
*
* \param ctx Socket
* \param buf The buffer to read from
* \param len The length of the buffer
*
* \return the number of bytes sent,
* or a non-zero error code; with a non-blocking socket,
* MBEDTLS_ERR_SSL_WANT_WRITE indicates write() would block.
*/
int mbedtls_net_send( void *ctx, const unsigned char *buf, size_t len );
/**
* \brief Read at most 'len' characters, blocking for at most
* 'timeout' seconds. If no error occurs, the actual amount
* read is returned.
*
* \param ctx Socket
* \param buf The buffer to write to
* \param len Maximum length of the buffer
* \param timeout Maximum number of milliseconds to wait for data
* 0 means no timeout (wait forever)
*
* \return the number of bytes received,
* or a non-zero error code:
* MBEDTLS_ERR_SSL_TIMEOUT if the operation timed out,
* MBEDTLS_ERR_SSL_WANT_READ if interrupted by a signal.
*
* \note This function will block (until data becomes available or
* timeout is reached) even if the socket is set to
* non-blocking. Handling timeouts with non-blocking reads
* requires a different strategy.
*/
int mbedtls_net_recv_timeout( void *ctx, unsigned char *buf, size_t len,
uint32_t timeout );
/**
* \brief Gracefully shutdown the connection and free associated data
*
* \param ctx The context to free
*/
void mbedtls_net_free( mbedtls_net_context *ctx );
#ifdef __cplusplus
}
#endif
#endif /* net_sockets.h */