c-libp2p/include/mbedtls/blowfish.h
2016-11-03 11:15:18 -05:00

203 lines
7.3 KiB
C

/**
* \file blowfish.h
*
* \brief Blowfish block cipher
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_BLOWFISH_H
#define MBEDTLS_BLOWFISH_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include <stddef.h>
#include <stdint.h>
#define MBEDTLS_BLOWFISH_ENCRYPT 1
#define MBEDTLS_BLOWFISH_DECRYPT 0
#define MBEDTLS_BLOWFISH_MAX_KEY_BITS 448
#define MBEDTLS_BLOWFISH_MIN_KEY_BITS 32
#define MBEDTLS_BLOWFISH_ROUNDS 16 /**< Rounds to use. When increasing this value, make sure to extend the initialisation vectors */
#define MBEDTLS_BLOWFISH_BLOCKSIZE 8 /* Blowfish uses 64 bit blocks */
#define MBEDTLS_ERR_BLOWFISH_INVALID_KEY_LENGTH -0x0016 /**< Invalid key length. */
#define MBEDTLS_ERR_BLOWFISH_INVALID_INPUT_LENGTH -0x0018 /**< Invalid data input length. */
#if !defined(MBEDTLS_BLOWFISH_ALT)
// Regular implementation
//
#ifdef __cplusplus
extern "C" {
#endif
/**
* \brief Blowfish context structure
*/
typedef struct
{
uint32_t P[MBEDTLS_BLOWFISH_ROUNDS + 2]; /*!< Blowfish round keys */
uint32_t S[4][256]; /*!< key dependent S-boxes */
}
mbedtls_blowfish_context;
/**
* \brief Initialize Blowfish context
*
* \param ctx Blowfish context to be initialized
*/
void mbedtls_blowfish_init( mbedtls_blowfish_context *ctx );
/**
* \brief Clear Blowfish context
*
* \param ctx Blowfish context to be cleared
*/
void mbedtls_blowfish_free( mbedtls_blowfish_context *ctx );
/**
* \brief Blowfish key schedule
*
* \param ctx Blowfish context to be initialized
* \param key encryption key
* \param keybits must be between 32 and 448 bits
*
* \return 0 if successful, or MBEDTLS_ERR_BLOWFISH_INVALID_KEY_LENGTH
*/
int mbedtls_blowfish_setkey( mbedtls_blowfish_context *ctx, const unsigned char *key,
unsigned int keybits );
/**
* \brief Blowfish-ECB block encryption/decryption
*
* \param ctx Blowfish context
* \param mode MBEDTLS_BLOWFISH_ENCRYPT or MBEDTLS_BLOWFISH_DECRYPT
* \param input 8-byte input block
* \param output 8-byte output block
*
* \return 0 if successful
*/
int mbedtls_blowfish_crypt_ecb( mbedtls_blowfish_context *ctx,
int mode,
const unsigned char input[MBEDTLS_BLOWFISH_BLOCKSIZE],
unsigned char output[MBEDTLS_BLOWFISH_BLOCKSIZE] );
#if defined(MBEDTLS_CIPHER_MODE_CBC)
/**
* \brief Blowfish-CBC buffer encryption/decryption
* Length should be a multiple of the block
* size (8 bytes)
*
* \note Upon exit, the content of the IV is updated so that you can
* call the function same function again on the following
* block(s) of data and get the same result as if it was
* encrypted in one call. This allows a "streaming" usage.
* If on the other hand you need to retain the contents of the
* IV, you should either save it manually or use the cipher
* module instead.
*
* \param ctx Blowfish context
* \param mode MBEDTLS_BLOWFISH_ENCRYPT or MBEDTLS_BLOWFISH_DECRYPT
* \param length length of the input data
* \param iv initialization vector (updated after use)
* \param input buffer holding the input data
* \param output buffer holding the output data
*
* \return 0 if successful, or
* MBEDTLS_ERR_BLOWFISH_INVALID_INPUT_LENGTH
*/
int mbedtls_blowfish_crypt_cbc( mbedtls_blowfish_context *ctx,
int mode,
size_t length,
unsigned char iv[MBEDTLS_BLOWFISH_BLOCKSIZE],
const unsigned char *input,
unsigned char *output );
#endif /* MBEDTLS_CIPHER_MODE_CBC */
#if defined(MBEDTLS_CIPHER_MODE_CFB)
/**
* \brief Blowfish CFB buffer encryption/decryption.
*
* \note Upon exit, the content of the IV is updated so that you can
* call the function same function again on the following
* block(s) of data and get the same result as if it was
* encrypted in one call. This allows a "streaming" usage.
* If on the other hand you need to retain the contents of the
* IV, you should either save it manually or use the cipher
* module instead.
*
* \param ctx Blowfish context
* \param mode MBEDTLS_BLOWFISH_ENCRYPT or MBEDTLS_BLOWFISH_DECRYPT
* \param length length of the input data
* \param iv_off offset in IV (updated after use)
* \param iv initialization vector (updated after use)
* \param input buffer holding the input data
* \param output buffer holding the output data
*
* \return 0 if successful
*/
int mbedtls_blowfish_crypt_cfb64( mbedtls_blowfish_context *ctx,
int mode,
size_t length,
size_t *iv_off,
unsigned char iv[MBEDTLS_BLOWFISH_BLOCKSIZE],
const unsigned char *input,
unsigned char *output );
#endif /*MBEDTLS_CIPHER_MODE_CFB */
#if defined(MBEDTLS_CIPHER_MODE_CTR)
/**
* \brief Blowfish-CTR buffer encryption/decryption
*
* Warning: You have to keep the maximum use of your counter in mind!
*
* \param ctx Blowfish context
* \param length The length of the data
* \param nc_off The offset in the current stream_block (for resuming
* within current cipher stream). The offset pointer to
* should be 0 at the start of a stream.
* \param nonce_counter The 64-bit nonce and counter.
* \param stream_block The saved stream-block for resuming. Is overwritten
* by the function.
* \param input The input data stream
* \param output The output data stream
*
* \return 0 if successful
*/
int mbedtls_blowfish_crypt_ctr( mbedtls_blowfish_context *ctx,
size_t length,
size_t *nc_off,
unsigned char nonce_counter[MBEDTLS_BLOWFISH_BLOCKSIZE],
unsigned char stream_block[MBEDTLS_BLOWFISH_BLOCKSIZE],
const unsigned char *input,
unsigned char *output );
#endif /* MBEDTLS_CIPHER_MODE_CTR */
#ifdef __cplusplus
}
#endif
#else /* MBEDTLS_BLOWFISH_ALT */
#include "blowfish_alt.h"
#endif /* MBEDTLS_BLOWFISH_ALT */
#endif /* blowfish.h */