BSIP: 0035
    Title: A Solution To Something-For-Nothing Issue
    Author: Abit More <https://github.com/abitmore>
    Status: Draft
    Type: Protocol
    Created: 2018-02-19
    Discussion: https://github.com/bitshares/bitshares-core/issues/132,
                https://github.com/bitshares/bitshares-core/issues/184
    Replaces: -
    Worker: To be done

# Abstract

Under some circumstances, when two orders get matched, due to rounding,
one order may be paying something but receiving nothing,
the other order may be paying nothing but receiving something.
This is the so-called something-for-nothing issue.

This looks clearly unfair.

This BSIP proposes an overall mechanism to avoid something-for-nothing issue
completely.

This BSIP also sets a principle: something-for-nothing shouldn't happen when
matching orders.

# Motivation

There are mechanisms in the system to try to avoid something-for-nothing issue,
however, not all scenarios are well-handled, see [bitshares-core
issue #184](https://github.com/bitshares/bitshares-core/issues/184) for example.

# Rationale

## Amounts, Prices and Rounding

Amounts in the system are integers with per-asset fixed precisions.
The minimum positive amount of an asset is called one Satoshi.

Prices in the system are rational numbers, which are expressed as
`base_amount / quote_amount` (precisions are omitted here).

To calculate how much amount of asset B is equivalent to some amount of
asset A, need to calculate `amount_of_a * a_to_b_price` which is
`amount_of_a * b_amount_in_price / a_amount_in_price`. The accurate result
of this formula is a rational number. To convert it to the final result which
is an amount, which is an integer, may need to round.

## Order Matching

An order means someone is willing to give out some amount of asset X expecting
to get some amount of asset Y. The ratio between the two assets is the price of
the order. The price can be expressed as either `x_amount / y_amount` or
`y_amount / x_amount`, when we know which amount in the price is of which asset,
the two expressions are equivalent. The amount of asset X is known and fixed.

In a market, E.G. the X:Y market, some people are selling X for Y, some people
are selling Y for X (or say buying X with Y). Orders are classified by type
(buy or sell), then ordered by price. For each type, the order offering the
best price is on the top. So, in every market there may be a top buy order and
a top sell order, name them highest bid and lowest ask, so there is
a highest bid price (in terms of `asset X amount / asset Y amount`),
and a lowest ask price (in terms of `asset X amount / asset Y amount` as well).

When the highest bid price is higher or equal to the lowest ask price, the two
top orders can be matched with each other.

## The Match Price

In a continuous trading market, orders are placed one by one, when comparing
every two orders, it's deterministic that one order is placed earlier than the
other.

In BitShares, it doesn't mean that the transaction that contains the first
order is signed before the transaction contains the second, but means that
the first order is processed earlier than the second in the witness node that
produced the block that contains the second order.

When two orders get matched, the one placed earlier is maker, the other one
is taker. Say, the maker provides an offer, the taker accept the offer.
So, when calculating who will get how much, we use the maker order's price,
aka maker price, as the match price.

## The Need for Compromise

When matching two orders, due to rounding, usually we're unable to completely
satisfy both parties.

Here is an example mentioned in the 4th comment of [bitshares-core
issue #132](https://github.com/bitshares/bitshares-core/issues/132):

Alice's order: Sell CORE at $3 / 8, balance 1000000 CORE
Bob's order: Buy CORE at $19 / 50, balance $10

Both assets have precision of 1, i.e. the order balances are
1000000 CORE-satoshis and 10 USD-satoshis repectively.

Alice is selling at $3/8 CORE = $0.375 / CORE and Bob is buying at
$19 / 50 CORE = $0.38, so based on the price, Alice and Bob should match.

Bob's $10 / $0.38 ~ 26.3. So 26.3 is the fewest CORE he is willing to accept
(assuming that the meaning of "price" is "the least favorable exchange rate
a party is willing to accept in trade"). Combined with the design restriction
that satoshis are indivisible, in practice this means Bob will only accept 27
or more CORE for his $10.

But $10 / 27 gives a price smaller than $0.370 and $0.371, which is smaller
than Alice's sale price of $0.375. So neither party can fill this offer.

We need to come to a compromise.

## The Possible Solutions

There are some possible solutions listed in the 5th comment of [bitshares-core
issue #132](https://github.com/bitshares/bitshares-core/issues/132):

- (a) Fill someone at a less favorable exchange rate than the price they
specified in their order.  Downside:  This violates the above definition of
price; i.e. if a user enters a price intending the system to never sell below
that price in any circumstance, the system will not always behave in a way
which fulfills that user intent.

- (b) Keep both orders on the books.  Downside:  This complicates the matching
algorithm, as now Alice might be able to match an order behind Bob's order.
Naive implementation would have potentially unbounded matching complexity;
a more clever implementation might be possible but would require substantial
design and testing effort.

- (c) Cancel an order.  This is complicated by the fact that an order such as
a margin call cannot be cancelled.  Downside:  When there are margin calls
happening, it seems perverse to delete a large order that's willing to fill
them just because the lead margin call happens to fall in a narrow window
which causes a rounding issue.  Also, orders cancelled by this mechanism
cannot be refunded.  Otherwise an attacker who wants to consume
a lot of memory on all nodes could create a large number of orders, then
trigger this case to cancel them all, getting their investment in deferred
cancellation fees back without paying the cancel op's per-order fee as
intended.

- (d) Require all orders to use the same denominator.  Altcoin exchanges and
many real-world markets like the stock market solve this problem by specifying
one asset as the denominator asset, specifying a "tick" which is the smallest
unit of price precision, and requiring all prices to conform.
Downside:  Complicates the implementation of flipped market UI, may require
re-working part of market GUI, reduces user flexibility, new asset fields
required to specify precision, if `n` assets exist then `O(n^2)` markets
could exist and we need to figure out how to determine the precision
requirement for all of them.

## The Chosen Solution

Current code actually implemented (a) in the first place: when matching two
orders, if there is a rounding issue, the order with smaller volume will be
filled at a less favorable price. It's the least bad compromise since it has
the most efficiency (highest traded volume while not hard to implement) among
the solutions.

However, when filling a small order at a less favorable price, the receiving
amount is often rounded down to zero, thus causes the something-for-nothing
issue. Current code tried to solve the issue by cancelling the smaller order
when it would receive nothing, but only applied this rule in a few senarios
(the processed parties won't be paying something for nothing):
* when matching two limit orders, processed the maker
* when matching a limit order with a call order, processed the call order
* when matching a settle order with a call order, processed the call order
* when globally settling, processed the call order

Other senarios that need to be processed as well (these to-be-processed parties
may be paying something for nothing in current system):
* when matching two limit orders, process the taker
* when matching a limit order with a call order, process the limit order
* when matching a force settle order with a call order, process the settle order
* when globally settling, process the settlement fund

## The Improved Solution (This BSIP)

The detailed rules proposes in this BSIP (new rules highlighted):
* match in favor of taker, or say, match at maker price
* round down receiving amounts when possible
  * when matching two limit orders, round down the receiving amounts in favor
    of bigger order, or say, try to fill the smaller order
    * **if the smaller order would get nothing after the round-down, cancel it**
  * when matching a limit order with a call order, in favor of call order,
    round down receiving collateral amount
    * **if the call order is receiving the whole debt (so the short position
   will be closed) but paying nothing, let it pay 1 Satoshi (round up);**
    * **otherwise, if the limit order would get nothing after the round-down,
   cancel it (it's smaller, so safe to cancel)**
  * when matching a settle order with a call order, in favor of call order,
    round down receiving collateral amount
    * **if the settle order would get nothing after the round-down, give it 1
   Satoshi (round up); after paid both side, check if a black swan event would
   be triggered by the round-up, if yes, trigger it**
  * when globally settling, in favor of call order, round down receiving
    collateral amount
    * **when the asset is not a prediction market, if a call order would pay
   nothing, let it pay 1 Satoshi (round up).**

Take the example mentioned in the 4th comment of [bitshares-core
issue #132](https://github.com/bitshares/bitshares-core/issues/132):
* Alice's order: Sell CORE at `$3 / 8 = $0.375`, balance `1000000 CORE`
* Bob's order: Buy CORE at `$19 / 50 = $0.38`, balance `$10`

Process:
* If both orders are limit orders
  * If Alice's order is maker, use `$3 / 8` as match price;
    since Bob's order is smaller, round in favor of Alice's order,
    so Bob will get
    `round_down($10 * 8 CORE / $3) = round_down(26.67 CORE) = 26 CORE`,
    the effective price would be `$10 / 26 CORE = $0.3846`.
  * If Bob's order is maker, use `$19 / 50` as match price; since Bob's
    order is smaller, round in favor of Alice's order, so Bob will get
    `round_down($10 * 50 CORE / $19 = round_down(26.32 CORE) = 26 CORE`,
    the effective price would still be `$10 / 26 CORE = $0.3846`.
* If Alice's order is a call order, always round in favor of it, we get
  same results.

If we change the example to this:
* Alice's order: Buy CORE at `3 CORE / $8 = 0.375`, balance `$1000000`
* Bob's order: Sell CORE at `19 CORE / $50 = 0.38`, balance `10 CORE`

Process:
* If both orders are limit orders, we get same results as above
* If Bob's order is a call order, we should always round in favor of it,
  however, it should have a debt amount which is an integer, for example
  `$27`, then Alice would get
  * `round_down(27 * 3 / 8) = round_down(10.125) = 10 CORE` as a maker, or
  * `round_down(27 * 19 / 50) = round_down(10.26) = 10 CORE` as a taker.


# Specifications

## When Matching Two Limit Orders

In `match( const limit_order_object&, OrderType ... )` function of `database`
class, after calculated `usd_receives` which is for the taker,
check if it is zero.
If the answer is `true`, skip filling and see the order is filled, return `1`,
so the order will be cancelled later.

## When Matching A Limit Order With A Call Order

In `check_call_orders(...)` function of `database` class,
after calculated `order_receives`, check if it is zero.
If the answer is `true`,
* if `call_receives` is equal to `call_itr->debt`, set `order_receives` to 1;
* otherwise, skip filling and cancel the limit order.

## When Matching A Settle Order With A Call Order

In `match( const call_order_object&, ... )` function of `database` class,
after calculated `call_pays`, round up it to `1` if it is zero.

If rounded up, after filled both orders, check and allow a black swan event.

## When Globally Settling

In `global_settle_asset(...)` function of `database` class, check each `pays`,
once it's zero, and the asset is not a prediction market, let it be `1`.

# Discussion

There is an argument suggests when matching call orders, we should always
round in favour of the call. If a settlement receives 0 collateral as a result,
that's acceptable, because the settlement price is unknown at the time when
settlement is requested, so no guarantee is violated (within the range of
rounding errors). This should keep the collateral > 0 as long as there is
outstanding debt. A counter-argument supports rounding up to 1 Satoshi since
rounding down to zero may break the promise of "every smart coin is backed
by something".

There is an argument says breaking the `min_to_receive` limit is a no-go,
because that's why it's called a "limit order". A counter-argument says
slightly breaking the limit is the least bad compromise.

# Summary for Shareholders

[to be added if any]

# Copyright

This document is placed in the public domain.

# See Also

* https://github.com/bitshares/bitshares-core/issues/132
* https://github.com/bitshares/bitshares-core/issues/184